/FIRE_RETARDANT_INSULATION_FOIL_(BS476_PART_6_&_7).jpg)
Fire Retardant Insulation Foil commonly be used as wrapping material for HVAC Ducting, Roofing, Wall, Floor, and etc.
/TUV_SUD_AND_BOMBA_MALAYSIA.jpg)
/FIRE_RETARDANTBS476_PART_6_&_7_Class_0.jpg)
/Red_Arrow.jpg){kind=icon}
BS476 Part 6 : Fire Propagation Test This measure the amount of heat released when the product under test is burned BS476 Part 7: Surface Spread of Flame Test Method of test to determine the classification of the surface spread of flame of products. Class 1 is the best rating To achieve Class “0” a product must achieve Class 1 in the Part 7 test and also past Part 6 test. Test done under this group of product is ISO 8301, MS ISO08302; ASTM C 1371; AS/NZS 4201.1; AS/NZS 4201.3; AS/NZS 1301.448s; AS/NZS 1301.423rp and TAPPI T470/Feature.jpg)
/0.jpg)
99%Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface Comply with fire properties accordingtothestandardBS476Part6&7 Reinforced with bidirectional fiberglass scrim or polyester yarn for better tearing resistance, higher tensile strength and assist on mechanical strength. Special bonding layer combined with aluminum foil giving it superior Vapor Barrier and Fire Retardant properties Suggested size:| Width (m) | Length (m) | Optimum pallet packing |
| 1.22 –1.25 ±1% | 60 ±1% | 100 Rolls |
/Specification.jpg)
| APRA K731 | APRA K431 | APRA K722 | |
| DESCRIPTION | Fire Retardant Double Sided Reflective Aluminum Paper Foil, 8X8 Fiberglass Scrim Reinforced | Fire Retardant Double Sided Reflective Aluminum Paper Foil, 16X8 Fiberglass Scrim Reinforced |
Fire Retardant Double Sided Reflective Aluminum Paper Foil, Polyester Yarn Reinforced |
| GRAMMAGE |
150 –180 gsm |
150 –180 gsm | 150 –180 gsm |
| THICKNESS |
200 –250 microns |
200 –250 microns | 200 –250 microns |
|
THERMAL RESISTANCE (ISO 8301, MS ISO8302) |
~ 1.375 m²K/w | ~ 1.282 m²K/w | ~ 1.335 m²K/w |
|
REFLECTIVITY (ASTM C 1371) |
0.98 |
0.98 | 0.98 |
|
EMISSIVITY (ASTM C 1371) |
0.02 | 0.02 | 0.02 |
|
LAYOUT DIAGRAM |
/KISB___APRA_K731_LD_20190627.jpg) |
/KISB___APRA_K431_LD_20190627.jpg) |
/KISB___APRA_K722_LD_20190627.jpg) |
/Recommended_Application.jpg)
Heat insulation industrial material HVAC duct insulation Building wrapping Cold room installation Thermal tank Wall insulation Sauna room/Technical_data_sheet_(TDS).jpg)
/APRA_K731.jpg)
/APRA_K431.jpg)
/APRA_K722.jpg)
APRA K731
APRA K431
APRA K722
.jpg)
Two way foil scrim kraft (FSK), reinforced with bidirectional fiberglass scrim
99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface Reinforced with bidirectional fiberglass scrim to increase the mechanical product strength and durability Suggested size:| Width (m) | Length (m) | Optimum pallet packing |
| 1.22 –1.25 ±1% | 60 ±1% | 120 Rolls |
| K730A | K430A | |
| DESCRIPTION | Foil Scrim Kraft Single Sided Reflective Aluminum Paper Foil, 8x8 Fiberglass Scrim Reinforced | Foil Scrim Kraft Single Sided Reflective Aluminum Paper Foil, 16x8 Fiberglass Scrim Reinforced |
| GRAMMAGE | 115 –125 gsm | 115 –125 gsm |
| THICKNESS | 180 –280 micron | 180 –280 micron |
|
TENSILE STRENGHT (ASTM D 828) |
MD: 5 –7 kN/m XD: 5 –7 kN/m |
MD: 6–8 kN/m XD: 5 –7 kN/m |
| TEAR RESISTANCE | Good | Good |
| VAPOUR BARRIER | Good | Good |
|
CORROSION (95% RH @50⁰C,30 DAYS) |
None | None |
| REINFORCEMENT |
Fiberglass Scrim (8x8 threads /100mm) |
Fiberglass Scrim (16x8 threads /100mm) |
| LAYOUT DIAGRAM |
.jpg) |
.jpg) |
Foil facing to bulk installation Foil backing for mineral wool Backing Material PU Foam Building wrapping Wall insulation Concrete / Clay title roofing Metal roofing
Single Sided Reflective Aluminium Paper Foil, 8x8 Fiberglass Scrim Reinforced (K730A)
Single Sided Reflective Aluminium Paper Foil, 16x8 Fiberglass Scrim Reinforced (K430A)
.jpg)
Double layer reflective surface for durable insulation performance
Further reinforcement with polyester yarn or fiberglass scrim to assist on product mechanical strength
Further reinforcement with polyester yarn or fiberglass scrim to assist on product mechanical strength
.png)
99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K720 ; K726) Metalized Film (high optical density) with high reflectivity (>0.75 - 0.95) and low emissivity (<0.05 - 0.25) surface. (K620 ; K726 ; K736M) Metalize film with better tear resistance for rough work, higher water or vapor permeability and tensile strength Reinforced with one direction polyester yarn or bidirectional fiber glass scrim for better tearing resistant and higher tensile strength Suggested size:| Product | Width (m) | Length (m) | Optimum pallet packing |
| K620; K720; K726 | 1.22 –12.5 ±1% | 60 ±1% | 130 Rolls |
| K736M | 1.22 –12.5 ±1% | 60 ±1% | 120 Rolls |
| K620 | K720 | K726 | K736M | |
| DESCRIPTION |
Double Sided Reflective Metalized Paper Film, Polyester Yarn Reinforced |
Double Sided Reflective Aluminium Paper Foil, Polyester Yarn Reinforced | Double Sided Reflective Aluminium Paper Foil/Film, Polyester Yarn Reinforced | Double Sided Reflective Metalize Paper Film, 8x8 Fiberglass Scrim Reinforced |
| GRAMMAGE |
95 –115 gsm |
110 –120 gsm | 105 –115 gsm | 105 –115 gsm |
|
THICKNESS |
130 –180 micron | 120 –170 micron | 125 –175 micron | 175 –275 micron |
|
TENSILE STRENGHT (ASTM D 828) |
MD: 11–12 kN/m XD: 9 –10 kN/m |
MD: 6 –7 kN/m XD: 4 –5 kN/m |
MD: 7 –9 kN/m XD: 5-7 kN/m |
MD: 8 –10 kN/m XD: 6 –8 kN/m |
|
PERMEABILITY (ASTM E96-80) |
Max -0.01 g/h/m² | Max -0.01 g/h/m² | Max -0.01 g/h/m² | Max -0.01 g/h/m² |
|
CORROSION (95% RH @50⁰C,30 DAYS) |
None | None | None | None |
|
DELAMINATION (95% RH @50⁰C,30 DAYS) |
None | None | None | None |
|
TEAR RESISTANCE |
Excellent | Good | Excellent | Excellent |
|
VAPOUR BARRIER |
Excellent | Excellent | Excellent | Excellent |
| REINFORCEMENT |
Polyester Yarn (Single Direction) |
Polyester Yarn (Single Direction) |
Polyester Yarn (Single Direction) |
Fiberglass Scrim (8x8 threads / 100mm) |
| LAYOUT DIAGRAM |
 |
 |
 |
 |
Foil facing to bulk installation Foil backing for mineral wool Backing material PU foam Building wrapping Wall insulation Concrete / Clay title roofing Metal roofing
.jpg)
.jpg)
.jpg)
Double Sided Reflective Metalized Paper Film, Polyester Yarn Reinforced (K620)
Double Sided Reflective Aluminium Paper Foil, Polyester Yarn Reinforced (K720)
Double Sided Reflective Aluminium Paper Foil-Film, Polyester Yarn Reinforced (K726)
Double Sided Reflective Metalized Paper Film,8x8 Fiberglass Scrim Reinforced (K736M)
.jpg)
Foil Yarn Kraft (FYK) one way reinforcement paper foil with better tearing strength.
99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K710) Metalized Film (high optical density)with high reflectivity (>0.75-0.95)and low emissivity (<0.05-0.25) surface (K610) Metalize film with better tear resistance for rough work, higher water or vapor permeability and tensile strength Reinforced with one direction polyester yarn to increase the mechanical product strength and durability Suggested size:| Width (m) | Length (m) | Optimum pallet packing |
| 1.22 –1.25 ±1% | 60±1% | 130 Rolls |
| K610 | K710 | |
| DESCRIPTION |
Single Sided Reflective Metalized Paper Film, Polyester Yarn Reinforced |
Single Sided Reflective Aluminum Paper Foil, Polyester Yarn Reinforced |
| GRAMMAGE |
80 –100 gsm |
85 –100 gsm |
| THICKNESS |
120 –170 micron |
115 –165 micron |
|
TENSILE STRENGHT (ASTM D 828) |
MD: 7–8 kN/m XD: 5 –6 kN/m |
MD: 5–6 kN/m XD: 3 –4 kN/m |
|
PERMEABILITY (ASTM E96-80) |
Max -0.03 g/h/m² | Max -0.03 g/h/m² |
|
CORROSION (95% RH @50⁰C,30 DAYS) |
None | None |
|
DELAMINATION (95% RH @50⁰C,30 DAYS) |
None | None |
| REINFORCEMENT |
Polyester Yarn (Single Direction) |
Polyester Yarn (Single Direction) |
| LAYOUT DIAGRAM |
.jpg) |
.jpg) |
Foil facing to bulk installation Foil backing for mineral wool Backing material PU foam Building wrapping Wall insulation Concrete / Clay title roofing Metal roofing
Single Sided Reflective Metalized Paper Film, Polyester Yarn Reinforced (K610)
Single Sided Reflective Aluminium Paper Foil, Polyester Yarn Reinforced (K710)
/Fire_Retardant_Radiant_Barrier_(MS2019_2014).jpg)
Radiant Barrier / Reflective Insulation / Vapor Barrier are known to be premium quality and is extensive used in various industries like Construction, Packaging and etc.
They can be used as wrapping material for HVAC Ducting, Roofing, Wall, Floor, and etc
They can be used as wrapping material for HVAC Ducting, Roofing, Wall, Floor, and etc
/TUV_SUD_,_BOMBA_MALAYSIA_,_SIRIM.jpg)
/Malaysia_Standard_(MS2019_2014).jpg)
/Red_Arrow.jpg){kind=icon}
MS2095 is standard compliance according to the Department of Standards Malaysia Declaration of standard that have been announce on October 2014 is referring to the building materials that comply with radiant barrier and reflective insulation building materials specification. This standard also listed under fourth schedule of standard for certification construction material by Construction Industry Development Board (CIDB) Malaysia/Fire_Retardant___BS476_Part_6_&_7_Class_0.jpg)
BS476 Part 6 : Fire Propagation TestThis measure the amount of heat released when the product under test is burned
BS476 Part 7: Surface Spread of Flame TestMethod of test to determine the classification of the surface spread of flame of products. Class 1 is the best rating
To achieve Class “0” a product must achieve Class 1 in the Part 7 test and also past Part 6 test. Test done under this group of product is ISO 8301, MS ISO08302; ASTM C 1371; AS/NZS 4201.1; AS/NZS 4201.3; AS/NZS 1301.448s; AS/NZS 1301.423rp, TAPPI T470 and ASTM D1004/Feature.jpg)
/O.jpg)
99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface Comply with fire properties according to the standard BS476 Part 6 & 7 Reinforced with high quality woven fabric or bidirectional fiberglass scrim for better tearing resistance, higher tensile strength and assist on mechanical strength. Special bonding layer combined with aluminum foil giving it superior Vapor Barrier and Fire Retardant properties Suggested size:| Product | Width (m) | Length (m) | Optimum pallet packing |
|
MS APRA K731 MS APRA K431 MS APRA K531 MS APRA K831 |
1.25 ±1% | 60 ±1% | 100 Rolls |
| MS AWA K750 | 1.25 ±1% | 60 ±1% | 110 Rolls |
/Specification.jpg)
| MS AWA K750 | MS APRA K731 | MS APRA K431 | |
| DESCRIPTION | Fire Retardant Double Sided Reflective Aluminum Woven Foil |
Fire Retardant Double Sided Reflective Aluminum Paper Foil, 8X8 Fiberglass Scrim Reinforced |
Fire Retardant Double Sided Reflective Aluminum Paper Foil, 16X8 Fiberglass Scrim Reinforced |
|
GRAMMAGE |
130 –150 gsm | 165 –220 gsm | 165 –220 gsm |
|
THICKNESS |
130 –180 microns | 230 –300 microns | 230 –300 microns |
|
THERMAL RESISTANCE (ISO 8301, MS ISO8302) |
~ 1.212 m²K/w | ~ 1.375 m²K/w | ~ 1.375 m²K/w |
|
REFLECTIVITY (ASTM C 1371) |
0.98 | 0.98 | 0.98 |
|
EMISSIVITY (ASTM C 1371) |
0.02 | 0.02 | 0.02 |
|
RESISTANCE TO DRY LAMINATION (AS/NZS 4201.1) |
No Delamination | No Delamination | No Delamination |
|
RESISTANCE TO WET LAMINATION (AS/NZS 4201.1) |
No Delamination | No Delamination | No Delamination |
|
SHRINKAGE (AS/NZS 4201.3) |
MD: < 0.5% CD: < 0.5% |
MD: < 0.5% CD: < 0.5% |
MD: < 0.5% CD: < 0.5% |
|
TENSILE STRENGTH (AS/NZS 1301.448s) |
MD: > 7.5 to < 9.5kN/m CD: > 7.5to < 9.5 kN/m |
MD: > 5 kN/m CD: > 3 kN/m |
MD: > 5 kN/m CD: > 3 kN/m |
|
EDGE TEAR RESISTANCE (TAPPI T470) |
MD: > 200 N CD: > 240 N |
MD: > 30 N CD: > 20 N |
MD: > 30 N CD: > 20 N |
|
VAPOUR BARRIER (ASTM E96) |
0.002 -0.14μg/N.s > 7 to < 450MN.s/g |
0.002 –0.14 μg/N.s | 0.002 –0.14 μg/N.s |
|
SURFACE WATER ABSORBENCY (AS/NZS 4201.6) |
- | > 100 g/m² | > 100 g/m² |
|
INITIAL TEAR RESISTANCE (ASTM D1004) |
MD: 45 –60 N CD: 45 –60 N |
- | - |
|
FOLDING ENDURANCE (AS/NZS 1301.423rp) |
- |
MD: > 2.00 log₁₀ 100 CD: > 1.70log₁₀ 50 |
MD: > 2.00 log₁₀ 100 CD: > 1.70 log₁₀ 50 |
| LAYOUT DIAGRAM |
/KISB___MS_AWA_K750_LD_20190627.jpg) |
 |
|
/Recommended_Application.jpg)
Heat insulation industrial material HVAC duct insulation Building wrapping Cold room installation Thermal tank Wall insulation Sauna room /Technical_Data_Sheet_(TDS).jpg)
/MS_AWA_K750.jpg)
/MS_APRA_K731.jpg)
/MS_APRA_K431.jpg)
MS AWA K750
MS APRA K731
MS APRA K431
We offer insulation foil with paper backed.
99%Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K710N) Metalized Film (high optical density) with high reflectivity (>0.75-0.95)and low emissivity (<0.05-0.25) surface (K610N) Metalize film with better tear resistance for rough work, higher water or vapor permeability and tensile strength Coupling with minimum 10mm of air space can cut down heat transfer by conduction and convection. Suggested size| Width (m) | Length (m) | Optimum pallet packing |
| 1.22 –1.25 ±1% | 60 ±1% | 130 Rolls |
| K610N | K710N | |
| DESCRIPTION | Single Sided Reflective Metalized Paper Film | Single Sided Reflective Aluminum Paper Foil |
|
GRAMMAGE |
75 –95 gsm | 85 –95 gsm |
|
THICKNESS |
115 –165 microns | 110 –160 microns |
|
TENSILE STRENGHT (ASTM D 828) |
MD: 5–6 kN/m XD: 3 –4 kN/m |
MD: 4–5 kN/m XD: 2 –3 kN/m |
|
PERMEABILITY (ASTM E96-80) |
Max -0.03 g/h/m² | Max -0.03 g/h/m² |
|
CORROSION (95% RH @50⁰C,30 DAYS) |
None | None |
|
DELAMINATION (95% RH @50⁰C,30 DAYS) |
None | None |
|
REINFORCEMENT |
None | None |
| LAYOUT DIAGRAM |
.jpg) |
.jpg) |
Foil facing to bulk installation Foil backing for mineral wool Backing material PU foam Building wrapping Wall insulation Concrete / Clay title roofing Metal roofing
Single Sided Reflective Aluminium Paper Foil (K610N)
Single Sided Reflective Aluminium Paper Foil (K710N)
For this series, we offer 3 models of choice to cater from Medium to Extra Heavy Duty application.
All K Foil Perforated Series models are reinforced with special fiberglass scrim for better product strength.
All K Foil Perforated Series models are reinforced with special fiberglass scrim for better product strength.
99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K731P ; K431P) Metalized Film ( high optical density ) with high reflectivity (>0.75 - 0.95) and low emissivity (<0.05 - 0.25) surface (K631P) Metalize film with better tear resistance for rough work, higher water or vapor permeability and tensile strength K731P is made to cater the Light Duty application, K431P made to cater the Heavy Duty application meanwhile K631P is light weight yet suitable for Extra Heavy Duty application with high tear and tensile strength. To reduce the risk of continuous tear off and to avoid glass wool from passing through, this series have been perforated with small openings (2.55mmdiameter) of diamond shape perforation. Reinforced with bidirectional fiberglass scrim for better tearing resistance and higher tensile strength Suggested size:| Product | Width (m) | Length (m) | Optimum pallet packing |
| K731P; K631P | 1.22 –1.25 ±1% | 60 ±1% | 100 Rolls |
| K431P | 1.22 –1.25 ±1% | 60 ±1% | 90 Rolls |
.jpg)
| K731P | K431P | K631P | |
| DESCRIPTION |
Double Sided Perforated Aluminum Paper Foil, 8x8 Fiberglass Scrim Reinforced |
Double Sided Perforated 8 Layers Aluminum Paper Foil, 8x8 Fiberglass Scrim Reinforced |
Double Sided Perforated Metallize Paper Film, 8x8 Fiberglass Scrim Reinforced |
|
GRAMMAGE |
120 –140 gsm | 190 –210 gsm | 90 –100 gsm |
|
THICKNESS |
190 –290 micron | 305 –405 micron | 175 –275 micron |
|
CORROSION (95% RH @50⁰C,30 DAYS) |
None | None | None |
|
DELAMINATION (95% RH @50⁰C,30 DAYS) |
None | None | None |
| REINFORCEMENT |
Fiberglass Scrim (8x8 threads /100mm) |
Fiberglass Scrim (8x8 threads /100mm) |
Fiberglass Scrim (8x8 threads /100mm) |
| LAYOUT DIAGRAM |
.jpg) |
.jpg) |
.jpg) |
.jpg)
ACMV Duct Internal Linear Sound Dampening Insulation Backing
Double Sided Perforated Reflective Metalize Paper Film, 8x8 Fiberglass Scrim Reinforced (K631P)
Double Sided Perforated 8 Layers Reflective Aluminium Paper Foil, 8x8 Fiberglass Scrim Reinforced (K431P)
Double Sided Perforated Reflective Aluminium Paper Foil, 8x8 Fiberglass Scrim Reinforced (K731P)
KFOIL Reflective Insulation / Vapor Barrier are known to be premium quality and is extensive used in various industries like Industrial Packaging, Construction Material and etc.
BS476 Part 6 : Fire Propagation Test This measure the amount of heat released when the product under test is burned BS476 Part 7: Surface Spread of Flame Test Method of test to determine the classification of the surface spread of flame of products. Class 1 is the best rating To achieve Class “0” a product must achieve Class 1 in the Part 7 test and also past Part 6 test. Test done under this group of product is ISO 8301, MS ISO08302; ASTM C 1371; AS/NZS 4201.1; AS/NZS 4201.3; AS/NZS 1301.448s; AS/NZS 1301.423rp and TAPPI T470
99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface Comply with fire properties according to the standard BS476 Part 6 & 7 Reinforced with bidirectional fiberglass for better tearing resistance, higher tensile strength and assist on mechanical strength. Special bonding layer combined with aluminum foil giving it superior Vapor Barrier and Fire Retardant properties Suggested size:| Width (m) | Length (m) | Optimum pallet packing |
| 1.22 –1.25 ±1% | 60 ±1% | 90 Rolls |
| AP2RA K450 | AP2RA S450 | ||
| DESCRIPTION | Fire Retardant Double Sided 8 Layers Vapour Barrier Aluminum Paper Foil, 8x8 Fiberglass Scrim Reinforced |
Fire Retardant Double Sided 8 Layers Vapour Barrier Aluminum Paper Foil, 16x8 Fiberglass Scrim Reinforced |
|
|
GRAMMAGE |
210 –230 gsm | 210 –230 gsm | |
|
THICKNESS |
250 –360 microns | 250 –360 microns | |
|
THERMAL RESISTANCE (ISO 8301, MS ISO8302) |
~ 1.375 m²K/w | ~ 1.375 m²K/w | |
|
REFLECTIVITY (ASTM C 1371) |
0.98 | 0.98 | |
|
EMISSIVITY (ASTM C 1371) |
0.02 | 0.02 | |
|
RESISTANCE TO DRY LAMINATION (AS/NZS 4201.1) |
No Delamination | No Delamination | |
|
 |
 |
Heat insulation industrial material HVAC duct insulation Building wrapping Cold room installation Thermal tank Wall insulation Sauna room.jpg)
AP2RA K450
AP2RA S450
/Woven_Foil_(Double_Sided).jpg)
Woven Fabric also one of backed material for our foil insulation. Premium woven quality is being use to
increase the tensile strength for extra tear strength and puncture resistance during installation
increase the tensile strength for extra tear strength and puncture resistance during installation
/FEATURE.jpg)
99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K750;K750A) Metalized Film (high optical density) with high reflectivity (>0.75-0.95) and low emissivity (<0.05-0.25) surface (K650;K650A) Reinforced with premium woven fabric quality to increase the mechanical product strength and durability Suggestion size:| Width (m) | Length (m) | Optimum pallet packing |
| 1.22 –1.25 ±1% | 60 ±1% | 110 Rolls |
/SPECIFICATION.jpg)
| K650A | K750A | K756A | |
| DESCRIPTION |
Double Sided Reflective Metallise Woven Film (PE) |
Double Sided Reflective Aluminium Woven Foil (PE) |
Double Sided Reflective Aluminium Woven Foil/Film |
|
GRAMMAGE |
120 – 140 gsm | 120 – 140 gsm | 120 – 140 gsm |
|
THICKNESS |
110 – 130 micron | 110 – 130 micron | 110 – 130 micron |
|
TENSILE STRENGHT (ASTM D 828) |
MD: 15 –17 kN/m XD: 15 –17 kN/m |
MD: 11 –15 kN/m XD: 11 –15 kN/m |
MD: 14 –18 kN/m XD: 14 –18 kN/m |
|
CORROSION (95% RH @50⁰C,30 DAYS) |
None | None | None |
|
TEAR RESISTANCE |
Excellent | Excellent | Excellent |
|
VAPOUR BARRIER |
Excellent | Good | Excellent |
|
WATER RESISTANCE |
No Delamination | No Delamination | No Delamination |
| LAYOUT DIAGRAM |
_K650A.jpg) |
_K750A.jpg) |
_K756A.jpg) |
/RECOMMENDED_APPLICATION.jpg)
/O.jpg)
Building wrapping Concrete / Clay tile roofing Metal Roofing Wall insulation Foil facing for bulk insulation/TDS.jpg)
.jpg)
.jpg)
DOUBLE SIDED REFLECTIVE METALIZED WOVEN FILM (K650A)
DOUBLE SIDED REFLECTIVE ALUMINIUM WOVEN FILM (K750A)
K756A
_images/WOVEN_FOIL_(SINGLE_SIDED).jpg)
Premium woven quality is being use to increase the tensile strength for extra tear strength and puncture resistance during installation.
_images/FEATURE.jpg)
99% Pure Aluminum Foil with high reflectivity (>0.98) and low emissivity (<0.02) surface (K740A) Metalized Film (high optical density)with high reflectivity (>0.75-0.95) and low emissivity (<0.05-0.25) surface (K640A) Reinforced with premium woven fabric quality to increase the mechanical product strength and durability Suggestion size:| Width (m) | Length (m) | Optimum pallet packing |
| 1.22 –1.25 ±1% | 60 ±1% | 120 Rolls |
_images/SPECIFICATION.jpg)
| K640A | K740A | |
| DESCRIPTION | Single Sided Reflective Metallise Woven Film (PE) | Single Sided Reflective Aluminium Woven Film (PE) |
|
GRAMMAGE |
85 – 95 gsm | 85 – 95 gsm |
|
THICKNESS |
85 – 105 micron | 85 – 105 micron |
|
TENSILE STRENGHT (ASTM D 828) |
MD: 13 –15 kN/m XD: 13 –15 kN/m |
MD: 10 –13 kN/m XD:10 –13 kN/m |
|
CORROSION (95% RH @50⁰C,30 DAYS) |
None | None |
|
TEAR RESISTANCE |
Excellent | Excellent |
|
VAPOUR BARRIER |
Excellent | Good |
|
WATER RESISTANCE |
No Delamination | No Delamination |
| LAYOUT DIAGRAM |
 |
 |
_images/RECOMMENDED_APPLICATION.jpg)
_images/blue_O.jpg)
Building wrapping Concrete / Clay tile roofing Metal Roofing Wall insulation Foil facing for bulk insulation_images/TDS.jpg)
Single Sided Reflective Metalize Woven Film (K640A)
Single Sided Reflective Aluminium Woven Foil (K740A)
